1. About This Manual
Symbol Conventions
Important User Information
This symbol indicates that special attention should be paid in order to ensure correct use as
well as to avoid danger, incorrect application of product, or potential for unexpected results
!
This symbol indicates important directions, notes, or other useful information for the proper
use of the products and software described herein
*
Modules contain ESD (Electrostatic Discharge) sensitive parts and components. Static
control precautions are required when installing, testing, servicing or replacing these
modules. Component damage may result if ESD control procedures are not followed. If you
are not familiar with static control procedures, reference any applicable ESD protection
handbook. Basic guidelines are:
• Touch a grounded object to discharge potential static
• Wear an approved grounding wrist strap
• Do not touch connectors or pins on component boards
• Do not touch circuit components inside the equipment
• Use a static-safe workstation, if available
• Store the equipment in appropriate static-safe packaging when not in use
!
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy themselves
that all necessary steps have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws, regulations, codes,
and standards
!
The illustrations, charts, sample programs and layout examples shown in this guide are
intended solely for purposes of example. Since there are many variables and requirements
associated with any particular installation, Pulseroller does not assume responsibility or
liability (to include intellectual property liability) for actual use based on the examples shown
in this publication
!
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 3 of 154
To Next Page
Loading...
Need help?
General