6.3. Jam Conditions
There are two (2) types of Jam conditions detected by the Ai2 Module:
Sensor Jam
Arrival Jam
Last modified: Jul 21, 2020
Both of these Jam conditions utilize a single Jam Timer that has to expire in order for the
condition to be active. Once either of these jam conditions becomes active; they will
automatically clear in the logic after the Auto Clear Time has expired. Both the Jam Time
and Auto Clear Time values are 5 seconds each by default. Please see How to Change Jam
and Auto Clear Timers
*
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 59 of 154
To Next Page
Loading...
Need help?
General