7.1.3.5. Settings Checkboxes
Both the Upstream and Downstream ZPA Zones have Settings check boxes to allow you to customize
some of the ZPA behavior. These settings can apply to only the zone you are connected to and viewing or
you can apply the same settings to multiple modules in a range of module nodes.
Disable Reset Delays
Disable Sensor Jam Auto Clear
Disable Arrival Timeout
Disable Manual Operation
Last modified: Aug 18, 2020
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 83 of 154
To Next Page
Loading...