4.9. Technical Specifications
Power Connector
Power connector is Degson DG245-5.0
Electrical Ratings
Power supply voltage 24.0V +/- 10%
Standby current consumption < 120mA
Motor Starting Current ≤ 8A
Motor Rated Current ≤ 3A
Maximum Ratings
Minimum Operating Voltage 21
Maximum Operating Voltage 30V
Storage temperature -25ºC to 70º C ( -13ºF to 160ºF)
Ambient Operating temperature 0ºC to 40ºC ( 32°F to 104°F)
Humidity 5% to 95% non-condensing
Vibration 0.152 mm (0.006 in.) displacement, 1G peak
Mechanical Shock 20G peak for 10ms duration (1.0 ms)
Enclosure IP Rating IP54
Maximum peak current 21.5A*
Maximum motor start current 8A
*This is the maximum current that will be allowed by the hardware over current protection circuitry. On board
firmware limits the amount of current based on the quantity and motor types connected
Operating outside these parameters may result in permanent Ai2 Module failure or
unexpected device behavior
!
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 29 of 154
To Next Page
Loading...
Need help?
General