7.2.5. Special Services Tab
Clear Motor Short Circuit Error
Another function on the Special Services tab is a button used to clear an MDR short circuit error. This
particular error is not logically cleared based upon an elapsed period timeout or other such reset. An MDR
short circuit error requires that either the module be powered down and then powered back up or by clicking
the Reset button on this tab. This function is made available in EasyRoll as a convenience so you don’t
have to cycle the power on the module.
There is not a separate Reset button for
left and right motors. One button will
perform the function for either or both
motors.
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 126 of 154
To Next Page
Loading...