7.1.3.5.4. Disable Manual Operation
In normal ZPA operation, if a zone is in Accumulation (either by external device or if Aux I/O Pin 2 is set to
Accumulate) and the carton is subsequently manually removed from the conveyor; the zone downstream of
the accumulated zone will run in an attempt to “find the lost carton”. In certain applications or situations
where manually removing cartons from accumulated zones is expected; you can disable the running of the
downstream zone to “find the lost carton”
Without Disable Manual Operations box checked
Carton accumulated in Upstream Zone
by Aux I/O Pin 2 Accumulate signal or
external network signal
If carton is removed from Upstream
Zone, the Downstream Zone will run to
“find the missing carton”. Run time is
the duration of the Jam Timer setting (5
sec. by default)
With Disable Manual Operations box checked
You first navigate the main screen to the
zone you want to prevent from running
when it’s upstream neighboring zone has
its carton removed. Clicking the Disable
Manual Operations check box will prevent
this zone from running when its upstream
neighbor has an accumulated carton
manually removed
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 87 of 154
To Next Page
Loading...