7.1.2. Node Identification
If a valid Node is selected in the From Node # text box
and its information is displayed on the main screen;
clicking the Blink & Wink switch icon will signal the
selected module to blink on and off all of its LED
indicators. Click the Blink & Wink switch again to turn
this off
Last modified: Jul 30, 2020
EasyRoll main screen has a feature identified as “Blink & Wink” that allows you to visually
verify the Node you have selected
*
Please note that when Blink & Wink is active, the module stops all motors
!
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 72 of 154
To Next Page
Loading...