7.1.3.1. Release Mode
Selecting the pull-down box
for ZPA Mode will show the
available selections.
Singulation is the default
configuration
Last modified: Aug 06, 2020
Selecting a new setting from the ZPA Mode drop down box immediately changes the zone’s
mode. If you want to set all Upstream zones for the range of nodes entered in the Node No.
text boxes, then click the Set All button. Similarly, you can do the same operation in the
“Downstream Zone” portion of the main screen.
*
Singulation Release Mode is the default setting and it is described in the Default Settings
and Operation section
*
Please note that Singulation and Train Release Modes are configurable per Zone and can
be mixed on the same network
*
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 74 of 154
To Next Page
Loading...
Need help?
General