Induct Forward Distance
Select Distance from the drop down box
and enter new values for upstream and/or
downstream Induct Forward pulses and
click the corresponding Set button. The
default is 0 pulses and the valid range is 0
to 65,535 pulses. The Set All button will
apply these same settings for the range of
modules indicated at the top of the dialog.
In this example we are changing the
Induct Forward distance to 100 mm for
both the upstream and downstream
zones and updating this setting to Nodes
3 thru 4
Last modified: Aug 18, 2020
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 110 of 154
To Next Page
Loading...
Need help?
General