Auto-Configuration Procedure
Start EasyRoll
V4.04 or higher
and invoke the
Advanced Dialog.
In the pop-up
panel select
Network Services
and click
Discover
For the Auto-Configuration to work properly, all loads, totes, product, containers, cartons,
etc. must be removed from the entire conveyor path and all photo-sensors must be aligned
and adjusted so that none are detecting that their respective zone is occupied. Failure to
meet these conditions will produce unexpected results
!
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 47 of 154
To Next Page
Loading...