Pulseroller ConveyLinx-Ai2 User Manual

When the
procedure is
done, you will see
the text go from
red to black and
you will notice
that the I.P.
addresses have
updated per the
direction of flow
To Change the Direction of Flow – Select the Module at the Opposite End of the
Network
If the most
upstream module
is the one
farthest from the
PC, select it, then
right click and
select AutoConfig
from Here. This
will start the
procedure.
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 50 of 154

Pulseroller ConveyLinx-Ai2 Specifications

General

Brand	Pulseroller
Model	ConveyLinx-Ai2
Category	Control Unit
Language	English