QLS-4100 Xe 4-67
“No Air” Warning
This option enables/disables the “No Air” warning that appears at startup if
the printer is not connected to a compressed air supply. When enabled, this
warning requires the user to press the SELECT key before startup can
continue.
If the printer is not going to be connected to an air supply, and may be
frequently restarted, disabling the “No Air” warning will speed up the
startup process.
To enable or disable the “No Air” warning :
1 If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.
2 Press the NEXT or PREVIOUS key until the Options menu is displayed.
Then press the SELECT key.
3 Press the NEXT or PREVIOUS key until the Ignore Host Commands
menu is displayed.
4 Press the + or – key until the desired setting is displayed. Available
options are Enabled or Disabled.
5 Press the SELECT key to confirm your choice.
“No Air” Warning
Enabled
Pause: Options
Press SELECT
To Next Page
Loading...
Need help?
General
