QLS-4100 Xe 1-3
Quick Start Guide
If you are an experienced user of a QuickLabel Digital Color Printer or you
have attended QuickLabel College training, use this Quick Start Guide as a
reference to begin producing beautiful color labels immediately.
In general, these operations should be performed in the sequence listed
below, skipping over any items that may have been previously completed.
Page 2-2 Unpack the printer
Page 2-7 Install the media unwind mandrel
Page 2-8 Connect the AC power cord
Page 2-9 Connect the host computer interface
Page 2-14 Connect the compressed air source
Page 3-2 Load thermal transfer ribbon
Page 3-4 Load label or tag media
Page 3-7 Adjust the media sensor
Page 3-8 Calibrate the printer to the appropriate media type
Setup software parameters
Appendix D Printing from Custom QuickLabel
Appendix E Printing from a Windows application with the QuickLabel
Windows Printer Driver
To Next Page
Loading...