4-34 Keypad controls and menus
Label Reprint
When using the QuickLabel Printer Driver for Windows to print to the QLS-
4100 Xe, data is transmitted from the PC software application to the printer
as a bitmapped image. You can use the Reprint option to quickly print any
quantity of the last label printed.
To reprint labels:
1 If the printer is in a Ready state, proceed to the next step.
If the printer is in a Pause state, press the NEXT or PREVIOUS key until
the Operation menu is displayed. Then press the SELECT key.
2 Press the NEXT or PREVIOUS key until the Label Reprint menu is
displayed.
3 Press the + or – key to specify the number of the last labels you wish to
reprint. You can reprint up to 999 copies.
4 Press the SELECT key. The quantity you specified will be printed.
Label Reprint
Copies = 1
Pause: Operation
Press SELECT
To Next Page
Loading...
Need help?
General
