QLS-4100 Xe 4-3
Print/Pause
When the printer is idle (i.e. not printing labels), the PRINT/PAUSE key will
toggle the printer between a Ready state and a Pause state as indicated on
the display. While the printer is printing labels, pressing the PRINT/PAUSE
key will put the printer in a Pause state and label printing will halt until the
PRINT/PAUSE key is pressed again.
Ready state:
Pause state:
Certain function menus are only available when the printer is in the Pause
state, as described in the following sections.
Form Feed/Advance
The FORM FEED/ADVANCE key serves two functions. If the key is pressed
momentarily and released, the printer will advance the media by one
calibrated media length. If the key is pressed and held, the printer will
advance media until the key is released.
Cancel
While a batch of labels or the test pattern is being printed, pressing the
CANCEL key will display the following message:
Pressing SELECT will immediately cease printing, canceling any pending
batches from memory and will return the printer to a Ready state.
Deletes all labels
SELECT to confirm
Pause
Ready
To Next Page
Loading...
Need help?
General
