QLS-4100 Xe 4-19
Display Counter
The printer can dynamically display either the ongoing total number of
labels that have been printed since the printer was last powered up or the
number of labels that have been printed within any specific batch or print
job. The printer’s label counting feature can also be turned off.
Note: The counter will disappear while menus are being navigated during
printing. The counter will be displayed and updated when the QLS-4100 Xe
resumes printing labels.
To set up the counter:
1 If the printer is in a Ready state, proceed to the next step.
If the printer is in a Pause state, press the NEXT or PREVIOUS key until
the System menu is displayed. Then press the SELECT key.
2 Press the NEXT or PREVIOUS key until the Display Cntrs menu is
displayed.
3 Press the + or – key until the desired counter setting is displayed. The
following options are available.
Off – No counter is displayed.
Total – Count of labels printed since last power on is displayed
Batch – Count of labels printed in current batch is displayed
The selected counter mode will now appear on the display while
printing.
Display Cntr
Off
Pause: System
Press SELECT
To Next Page
Loading...
Need help?
General
