QLS-4100 Xe 4-11
Print Speed
This function allows you to choose the printing speed. The printer is capable
of printing at speeds of 2 – 7 in/s (inches per second) in 1 in/s increments.
To set the print speed via the front panel:
1 If the printer is in a Ready state, proceed to the next step.
If the printer is in a Pause state, press the NEXT or PREVIOUS key until
the Adjust menu is displayed. Then press the SELECT key.
2 Press the NEXT or PREVIOUS key until the Speed menu is displayed.
3 Press the + or – key until the desired print speed is displayed. Available
print speeds are 2, 3, 4, 5, 6, or 7 inches per second.
4 Press the SELECT key to confirm your choice.
Note: Setting the print speed via software will always override this
setting. You can set the print speed via Custom QuickLabel or the
QuickLabel Windows Printer Driver.
Note: The printer’s maximum speed will depend on the content of the
format. For example, formats with incrementing or database fields may
have to be printed at slower speeds.
Speed
3 in/s
Pause: Adjust
Press SELECT
To Next Page
Loading...
Need help?
General
