QLS-4100 Xe 4-27
Printer Settings
This function prints all of the current settings of the printer using the
printhead of your choice.
To print current printer settings:
1 If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.
2 Press the NEXT or PREVIOUS key until the Cal & Setup menu is
displayed. Then press the SELECT key.
3 Press the NEXT or PREVIOUS key until the Printer Settings menu is
displayed.
4 Press the + or – key to specify the printhead that will be used to print the
settings.
5 Press the SELECT key to print out a listing of current settings for the
QLS-4100 Xe.
Printer Settings
Print With Head 1
Pause: Cal & Setup
Press SELECT
To Next Page
Loading...
