R2Sonic 2026 - 14.5.1 GUI Command Line Switches

Page 207 of 254
Version
6.3
Rev
r012
Date
05-11-2022
Cmd
Format
Units
Values
Description
TXP0
f32
dB/1µPa
0, 191 to 221
Transmitter power
WCR0
u32
0 = off
1 = on
Water column enable, head 1.
Equivalent to setting the water column check
box in the GUI
WCR1
u32
Water column enable, head 2.
Equivalent to setting the water column check
box in the GUI
Note the commands which set angle values are in degrees. This is different from angular commands sent to
the head which are in radians.
Changes:
09 March 2012: added GUI commands (this section)
31 Oct 2013: added ABS0 and SPR0
10 Jul 2015 added TXL0
14.5.1 GUI Command Line Switches
/custffmpeg Allows user to define video recording commands for ffmpeg. The command line
options are in the CurrentSettings.ini file. Use at your own risk as ffmpeg is a difficult
program to comprehend.
/instance=n Multiple gui instances, where n is the gui instance. n = 1 to 9. Need
CurrentSettingsn.ini file.
/sector160 Sector coverage override for 2020. Normally, 2020 sector coverage is 130°. This
switch allows 2020 sector coverage to 160°.
NB. The commands which set angle values are in degrees. This is different from angular commands
sent to the head, which are in radians