14
5.4.2. I/O Schematic Diagrams
4 inputs 4 outputs
6. UNPACKING AND INSTALLATION
A. Take the indicator out of the packaging.
B. Connect the indicator to a weighing platform, next place the weighing
device on a flat and even surface. Keep it far away from any sources of
heat.
7. START-UP AND OPERATION
7.1. Levelling
To level the weighing instrument turn its feet. Keep turning the feet until the air
bubble takes central position:
7.2. Switching the Indicator on
• Plug the power cord to the mains.
• Press
key, it is to be found on the top of the operation panel.
• Upon completed start-up the home screen is displayed automatically.
7.3. Battery Status
Optional scale design features an internal battery. pictogram, displayed
at the top of the screen, either signals battery status or informs that battery
charging process is in progress:
To Next Page
Loading...
