RADWAG PUE HX7

43
17. PRINTOUTS
<Printouts> submenu allows you to:
• define template for header, GLP and footer printout,
• define report templates: adjustment, dosing, formulations.
• create 10 non-standard printouts.
17.1. Print Mode: Header – GLP Printout - Footer
Printout comprises 3 basic sections:
Header
Group of parameters allowing you to declare variables that are to be
printed on a header printout.
GLP printout
Group of parameters allowing you to declare variables that are to be
printed on a measurement printout.
Footer
Group of parameters allowing you to declare variables that are to be
printed on a footer printout.
For each section a customised list of printout variables has been specified.
You must set respective option either enabling or disabling particular variable
printing.
Variables list
HEADER GLP printout FOOTER
Dashes *
Working mode *
Date *
Time *
Scale type
Scale S/N
Operator *
Product *
Customer
Universal variable 1
Universal variable 2
Universal variable 3
Platform number
Empty line *
Adjustment Report
Non-standard printout
Date
Time
Operator
Product
Customer
Packaging
Universal variable 1
Universal variable 2
Universal variable 3
Net
Tare
Gross
Current result *
Platform number
Adjustment Report
Non-standard printout
Working mode
Date
Time
Scale type
Scale S/N
Operator
Product
Customer
Universal variable 1
Universal variable 2
Universal variable 3
Platform number
Dashes *
Empty line *
Adjustment Report
Signature *
Non-standard printout
*) – Variables accessible by default (marked with pictogram).
How to Operate Printouts
1. To print variables comprised within GLP printout section which are
enabled for printing and marked with
pictogram, press key
located on the weighing device panel.