35
Ethernet
IP Address: IP address of the scale.
Port: number of port for transmission protocol.
Timeout [ms]: time delay - time interval for disconnection, counted from
the moment of the most recent command sent from the peripheral
device to which the weighing device is connected.
*) – optional design.
15.2.2. Code Page
In order to provide correct integration of the weighing device with the printer
(correct printout of diacritical signs of a given language) it is necessary to make
sure that the code page of a sent printout is accordant with a code page of
a printer. There are two methods for obtaining code page accordance:
• by setting the right code page in the settings of a printer (read the user
manual of the printer) – it must be accordant with the printout code page
of a weighing device:
Code page Language
1250 Polish, Czech, Hungarian.
1252 English, German, French, Spanish, Italian.
1254 Turkish.
• by sending the control code from the weighing device, which automatically
sets the right code page of the printer (i.e. code page accordant with the
one of a weighing device).
Default code page value of the printer is 1250 – Central
European code page.
Exemplary weighing device settings for correct printout of Polish signs with use
of EPSON printer connected to RS232 port:
EPSON TM-U220D EPSON TM-T20 EPSON TM-T20
Baud rate 9600 bit/s 38400 bit/s 38400 bit/s
Parity None None None
Code page 852 1250 852
Prefix - 1B742D 1B7412
To Next Page
Loading...
