RADWAG PUE HX7

60
Procedure:
• Enter <Misc / Sounds> submenu and set respective option.
Where:
Sound signal enabled.
Sound signal disabled.
22.3. Display Brightness
Parameter allowing you to change display brightness, the brightness can be
changed within 0% - 100% range.
Procedure:
• Enter <Misc / Display brightness> submenu and set respective value.
Available values: 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%,
100% (set by default).
22.4. Date and Time
Parameter allowing you to set current date and time, and to specify date and
time format.
Procedure:
• Enter <Misc / Date and time> submenu and change the settings. Refer
to the below table:
Parameter Description
Date Enter this parameter to set current date.
Time Enter this parameter to set current time.
Date format *
Enter this parameter to set date format. Options: YYYY.MM.DD (set by
default), YYYY.DD.MM, DD.MM.YYYY, MM.DD.YYYY, YYYY/MM/DD,
YYYY/DD/MM, DD/MM/YYYY, MM/DD/YYYY, YYYY-MM-DD, YYYY-
DD-MM, DD-MM-YYYY, MM-DD-YYYY.
Time format **
Enter this parameter to set time format. Options: HH:mm:ss 24H
(set by default), 1 HH:mm:ss 12H, HH-mm-ss 24H, HH-mm-ss 12H,
HH.mm.ss 24H, HH.mm.ss 12H.
*) Date format symbols: Y – year, M – month, D – day.
**) Time format symbols: HH – hour, mm – minute, ss – second, 24H – 24-hour mode,
12H – 12-hour mode.