70
28. WORKING MODE – PARTS COUNTING
<Parts counting> is a working mode enabling you to determine quantity
of small pieces of the same mass, which determination is done on the basis
of reference weight value of single piece, either determined using the weighing
device or taken form the database.
28.1. Home Screen
28.2. Local Settings
In order to access local settings, press operation panel key to which
<
Working mode parameters> pictogram is assigned:
ACAI For detailed description read section 28.2.1.
Minimum Reference Sample Mass For detailed description read section 28.2.2.
Readout For detailed description read section 26.1.
Save mode For detailed description read section 26.2.
Auto threshold For detailed description read section 26.3.
Result control For detailed description read section 26.4.
Autotare For detailed description read section 26.5.
Labelling mode For detailed description read section 26.6.
Statistics For detailed description read section 26.7.
To Next Page
Loading...
Need help?
General
