RADWAG PUE HX7

88
32.2. Database Import
Import of weighing device databases carried out using a USB flash drive.
Procedure:
• Enter selected database.
• Activate function keys, to do it press
key.
• Connect the USB flash drive to the USB A port.
• Press key to which
pictogram (import) is assigned. Databases stored
on the USB flash drive are imported to the weighing instrument memory
automatically.
• Respective messages are displayed to confirm successfully completed
operation.
32.3. Adding Database Record
• Enter selected database.
• Activate function keys, to do it press
key.
• Press operation panel key to which
pictogram (add) is assigned. New
record is automatically edited.
32.4. Deleting Database Record
• Enter selected database.
• Activate function keys, to do it press
key.
• Press operation panel key to which
pictogram (delete one by one)
is assigned. Message <Delete record?> is displayed.
• Press
key to confirm. The selected record gets deleted.
32.5. Deleting Database Content
• Enter selected database.
• Activate function keys, to do it press
key.
• Press key to which
pictogram (delete all database records) is assigned.
Message <Delete all records?> is displayed.
• Press
key to confirm. All database records get deleted.