82
Status Completed
----------------------------------------
Signature
........................................
Report on each completed process is saved to <Dosing reports> database,
the file name is a combination of date and hour of process completion and
of process status (list of dosing report data – read section 33.3.3).
31. WORKING MODE – FORMULATIONS
Formulations is a working mode enabling you to make multi-ingredient mixture.
31.1. Home Screen
31.2. Local Settings
In order to access local settings, press operation panel key to which
<
Working mode parameters> pictogram is assigned:
Request multiplier
Enter to force query regarding formulation multiplier, i.e. value by
which the weight, high deviation and low deviation values of <mass>
type are to be multiplied.
Request cycles
quantity
Enter to force query regarding number of formulation process cycles,
i.e. to specify how many times the whole process is to be repeated.
Request lot number Enter to provide series number for formulation.
Confirm ingredients
manually
Enter to enforce manual confirmation for each weighing by pressing
of
key.
Automatic taring
Enter to enable automatic taring at the moment of formulation start,
and after weighing of each ingredient.
Readout For detailed description read section 26.1.
To Next Page
Loading...
