59
21.4. Custom Units
Option available for non-verified scales exclusively
Parameter allowing you to declare two custom units. Displayed custom unit
value is a result of calculation, where obtained in the course of measurement
weight value is multiplied by a multiplier determined for this particular custom
unit. By default the custom units are marked as: [u1] – custom unit 1 and [u2]
– custom unit 2.
Procedure:
• Enter <Units / Custom unit 1> submenu, set the following parameters:
Name
Unit name (3 characters maximum).
Multiplier
Adjustment unit multiplier.
• Go to the home screen.
• Now you can use the custom unit, to do it press
key.
Procedure for declaring <Custom unit 2> is analogous.
22. MISCELLANEOUS PARAMETERS
Parameters facilitating scale operation. To set these parameters go to <
/ Misc> submenu.
22.1. Interface Language
Parameter allowing you to set program menu language.
Procedure:
• Enter <Misc / Language> submenu and set the interface language.
Available languages: Polish, English, German, French, Spanish, Czech.
22.2. 'Beep' Sound
Parameter allowing you to enable/disable sound signal informing the operator
about pressing panel key(s).
To Next Page
Loading...
