RADWAG PUE HX7

83
31.3. New Formulation
• Enter < / Databases / Formulations> submenu.
• Press operation panel key to which
pictogram (add) is assigned. New
record is automatically edited. For list of new formulation data read section
32.6.3 of this manual.
• Enter <Ingredients> submenu, add formulation ingredients one by one,
do it by pressing key to which
pictogram (add) is assigned.
List of ingredient data:
Name Ingredient name (43 characters maximum).
Code Ingredient code (16 characters maximum).
Mass Target mass of the ingredient.
Deviation type Declared deviation type: unit of mass or value in [%].
High deviation High deviation of ingredient mass in 'Formulations' mode.
Low deviation Low deviation of ingredient mass in 'Formulations' mode.
Weight entered
manually
Manual mode for entering ingredient mass (ingredient is not weighed).
Platform number Assigning platform number to a formulation ingredient.
Formulation ingredients are acquired from <Products>
database.
• Modification of ingredient settings is possible upon editing of the selected
ingredient, to do it press key to which
pictogram (edit) is assigned.
When
1. you declare low deviation of value greater than the declared ingredient
mass then the following message is displayed: <Value too high>. Enter
correct low deviation value.
2. you declare high deviation of value greater than the declared ingredient
mass then the following message is displayed: <Value too high>. Enter
correct high deviation value.
• Enter the required data and press button, the new ingredient
is added to the formulation.
• Enter the last ingredient and go to the home screen, do it by pressing
key.