31
Set the transmission parameters in accordance with your local
network.
<MAC address> parameter is automatically assigned to the
weighing device with <Read-only> attribute.
If you select
option for <DHCP> parameter, the remaining
transmission parameters are given <Read-only> attribute.
14.3. USB A Port
USB port of type A is intended for:
• connecting a USB flash drive in order to enable:
- printout of measurement data (set <Printer/Port> parameter
to <Pendrive> value),
- databases export/import,
- operator parameters export/import,
- Alibi and weighing reports export,
• connecting scale to a PCL printer,
• connecting EPSON TM-T20 printer (featuring USB port).
The USB flash drive must support FAT files system.
USB flash drive is not supported by optional USB (2) M12 4P
connector.
15. PERIPHERAL DEVICES
15.1. Computer
The weighing device can connect with a computer. Active weighing device –
computer connection is signalled by
pictogram (top bar of the home
screen). To configure 'scale' - 'computer' connection settings go to <
/
Peripherals / Computer> submenu.
To Next Page
Loading...
