37
15.3. Barcode Scanner
The scale can integrate with a barcode scanner. The barcode scanner is used
to facilitate quick search for database records.
Enter <Communication> submenu and set baud rate for
a barcode scanner (by default 9600b/s). For detailed
description of 'scale' - 'barcode scanner' communication read
ANNEX 04 of this user manual.
15.3.1. Port
Parameter allowing you to set port for communication between the weighing
device and the barcode scanner. Available ports:
RS232 (1)
RS 232 (2) *
RS 232 (3) *
RS 232 ports (M12 8P connectors).
USB A (1) Port USB typu A.
USB A (2) * USB port of type A (M12 4P connector).
*) – optional design.
Procedure:
• Enter <Peripherals / Barcode Scanner / Port> submenu and set
respective port.
15.3.2. Offset
Parameter allowing you to set the first significant code's character, characters
preceding the first significant character are skipped during comparison search.
Procedure:
• Enter <Peripherals / Barcode Scanner / Offset> submenu and, using the
on-screen keyboard, enter a required value.
15.3.3. Length of Code
Parameter allowing you to set the number of code's characters to be taken into
account during search procedure.
Procedure:
• Enter <Peripherals / Barcode Scanner / Length of code> submenu and,
using the on-screen keyboard, enter a required value.
To Next Page
Loading...
