41
Available diode bar graph types: Linear, Weighing thresholds signalling,
Checkweighing.
16.2.1. „Linear”
Bar graph of this type provides you with a linear presentation of the weighing
range.
16.2.2. „Weighing thresholds signalling”
Bar graph of this type shows where Min and Max thresholds are (providing that
they have been declared).
• Visualisation of mass value lower than MIN value:
• Visualisation of mass value higher than MIN value and lower than MAX
value:
• Visualisation of mass value higher than MAX value:
16.2.3. „Checkweighing”
Bar graph of this type shows percent deviation of nominal mass.
• If the measured mass value is higher than the MIN value and lower than
1/3 of MIN-MAX range, then the centre green field lights up along with the
field on its left.
To Next Page
Loading...
