74
29.1. Home Screen
29.2. Local Settings
In order to access local settings, press operation panel key to which
<
Working mode parameters> pictogram is assigned:
Readout For detailed description read section 26.1.
Save mode For detailed description read section 26.2.
Auto threshold For detailed description read section 26.3.
Result control For detailed description read section 26.4.
Autotare For detailed description read section 26.5.
Labelling mode For detailed description read section 26.6.
Statistics For detailed description read section 26.7.
29.3. Reference Sample Mass Determined by Weighing
If the reference sample is to be weighed in a container, first put the container
on a weighing pan and tare it.
• Press button (Determine reference sample mass), the following
message is displayed: <Put reference sample>.
• Load the weighing pan with reference mass. When the indication is stable
(
pictogram is displayed) press key to confirm the value.
• Now (instead of weight value of the measured load) difference between
values of loaded mass and reference mass is displayed in [%].
To Next Page
Loading...
