28
13.5. Weighing Unit Change
You can change the weighing unit, to do it press key.
Options in case when the main unit is [g]:
• g (gram),
• kg (kilogram),
• ct (carat),
• lb (pound)*,
• oz (ounce)*,
• N (newton)*,
• u1 (custom unit 1)*,
• u2 (custom unit 2)*.
*) – unit disabled for verified weighing devices.
Options in case when the main unit is [kg]:
• kg (kilogram),
• lb (pound)*,
• N (newton)*,
• u1 (custom unit 1)*,
• u2 (custom unit 2)*.
*) – unit disabled for verified weighing devices.
You can declare start unit and two custom units – for detailed
information read section 21, „UNITS”.
13.6. Setting MIN, MAX Thresholds
MIN, MAX thresholds are used:
• to control mass of the weighed loads (read section 26.4 of this user
manual),
• to visualize weighing range via diode bar graph (read section 16 of this
user manual),
• to visualize weighing range via bar graph widget (read section 19.1.3
of this user manual),
• to control external automation systems using digital outputs of the
indicator (read section 18.2 of this user manual).
The mass is considered to be correct if it is comprised within MIN and MAX
threshold values. You can set MIN, MAX thresholds:
To Next Page
Loading...
