58
In order to set units enter < / Units> submenu.
Accessibility of particular units is conditioned by weighing
device status; i.e. it depends on the fact whether the given
scale is verified or not.
21.1. Units Availability
Parameter allowing to declare which units are to be accessible upon pressing
key.
Procedure:
• Enter <Units / Availability> submenu.
• Units list is displayed, mark units of your choice as available (
where: -
Unit enabled,
- Unit disabled).
21.2. Start Unit
Upon setting start unit, the scale activates with the set start unit for these
modes where change of the unit is possible.
Procedure:
• Enter <Units> submenu, next enter <Start unit activation> parameter.
• Go to <Start unit> submenu and select start unit from the list.
• Go back to the home screen and restart the weighing device.
• After restart, the weighing device runs with the declared start unit.
21.3. Gravitational Acceleration
<Gravitational acceleration> parameter compensates changes of gravity
force being a result of different latitude and altitude when the selected unit
is „Newton” [N].
Procedure:
• Enter <Units / Gravitational acceleration> submenu, <Gravitational
acceleration> edit box is displayed.
• Enter gravitational acceleration value respective for the particular place
of use and press
key to confirm changes.
To Next Page
Loading...
