99
36. TECHNICAL SPECIFICATIONS
Housing Stainless steel
Ingress protection IP68 / IP69
Display 7’’ colour
Power supply 100-240VAC 50-60Hz
Optional power supply Internal battery
Operating temperature -10 °C ÷ 40 °C
Maximum signal gain 19.5 mV
Maximum impedance of load cell 1200 Ω
Minimum impedance of load cell 50 Ω
Connection of load cells 4 or 6 wires + shield
Weighing platforms quantity 1 (optionally 2)
RS232 M12 8P connector
USB USB A connector
Ethernet RJ45 connector
IN/OUT
4IN – M12 8P connector; 4OUT – M12 8P
connector
OPTIONAL EQUIPMENT
12IN/12OUT module 12IN/12OUT cable gland
AN Analog Outputs Module 4 - 20 mA, 0 - 20 mA, 0 - 10 V
Profibus module 2 x M12 5P connector
RS485 M12 8P connector
RS232 x 2 M12 8P connector
37. ERROR MESSAGES