63
23.4. Adjustment Report
Adjustment report is automatically generated at the end of each adjustment
process, next it is sent to port selected for <Peripherals / Printer>.
To declare report content go to <Printouts / Adjustment report> submenu.
For instruction on how to declare adjustment report settings read section
'Printouts'.
Report example:
------------Adjustment report-----------
Adjustment type External
Operator Nowak Jan
Date 2018.04.10
Time 13:22:28
Scale S/N 123456
Adjustment result difference 0.0 g
----------------------------------------
Signature
........................................
24. SCALE DATA
Scale data menu provides information on the weighing device and its program.
The parameters serve informative purposes: scale S/N, scale type, software
version, product code, settings printout. In order to send weighing device
settings (all parameters) to printer port, select <Settings printout> parameter.
25. WORKING MODES – General Information
The weighing device features the following working modes:
Weighing
Parts counting
Percent weighing
Dosing
Formulations
25.1. Running Working Mode
• Go to the home screen and press key, <Working modes>
submenu providing list of available working modes is displayed.
To Next Page
Loading...
