39
Packaging Name, Code.
Lot number **
Batch number **
*) - <Filtering> submenu hidden. Function inactive.
**) - <Filtering> submenu hidden. Function active.
15.3.7. Test
Parameter allowing you to verify if operation of a barcode scanner connected
to a scale is correct.
Procedure:
• Enter <Barcode Scanner / Test> submenu, <Test> edit box is displayed,
it features ASCII field and HEX field.
• The code is scanned and entered to the ASCII field and HEX filed, next
the test result is displayed in the bottom part.
When:
• <Prefix> and <Suffix> declared in scale settings comply with <Prefix>
and <Suffix> of the scanned code, the test result is <Positive>.
• <Prefix> and <Suffix> declared in scale settings do NOT comply with
<Prefix> and <Suffix> of the scanned code, the test result is <Negative>.
15.4. Additional Display
Settings of connection between a scale and an external additional display.
15.4.1. Port
Parameter allowing you to set port for communication between the weighing
device and the additional display. Available ports:
RS232 (1)
RS 232 (2) *
RS 232 (3) *
RS 232 ports (M12 8P connectors).
*) – optional design.
Procedure:
• Enter <Peripherals / Additional display / Port> submenu and select
respective port.
To Next Page
Loading...
