86
In the case of trying to accept unstable weighing result, the
following message is displayed: <Unstable measurements>.
• After weighing of the last ingredient, PS=Completed status is displayed
(process completed).
• New formulation process may begin.
31.5. Formulation Report
Formulation report is automatically generated at the end of each formulation
process, next it is sent to port selected for <Peripherals / Printer>. To declare
report content go to <Printouts / Formulation report> submenu.
For instruction on how to declare adjustment report settings read section
'Printouts'.
Report example:
-----------Formulation report-----------
Start date 2018.07.10 13:21:40
End date 2018.07.10 13:23:28
Operator Nowak Jan
Ingredients quantity 2
Measurements quantity 2
Target value 3.000 kg
Sum 3.018 kg
Difference 0.018 kg
Status Completed
----------------------------------------
Signature
........................................
Report on each completed process is saved to <Formulation reports>
database, the file name is a combination of date and hour of process
completion and of process status (for the list of dosing report data read section
33.3.4).
32. DATABASES
Weighing device software comprises the following databases:
Database name Max records qty
Products 15000
Operators 500
Formulations 500
Packaging 500
To Next Page
Loading...
