85
Workspace data:
LD Low deviation value.
HD High deviation value.
PS
Process status, the status takes the following values: -3.000kg – amount left
to be weighed; [1/3] – cycle 1 of 3; OK – target mass obtained; Pause –
process inhibited: a) by means of
(pause) button, to restart the process
press
button, b) stable weighing result is awaited for, Taring – taring
process in progress; Completed – formulation process completed; Aborted –
formulation process aborted.
Formulation Formulation name.
Ingredient
Information regarding weighed formulation ingredient: 1 – ingredient no.,
4 – ingredients quantity, [Ingredient 1] – ingredient name.
Buttons that are assigned to operation panel keys:
Local parameters (button inactive during the ongoing process).
Select formulation (button inactive during of the ongoing process).
Process start (button inactive during the ongoing process).
Process stop.
Process pause.
Bar graph operation:
• Visualisation of mass value lower than the value of [LD], low deviation:
• Visualisation of mass value higher than the value of [LD], low deviation,
and lower than the value of [HD], high deviation:
• Visualisation of mass value higher than the value of [HD], high deviation:
• Weigh expected amount of each ingredient.
LD=1.600kg
HD=1.800kg
LD=1.600kg
HD=1.800kg
LD=1.600kg
HD=1.800kg
To Next Page
Loading...
