RADWAG PUE HX7

47
Min Value of low threshold of manual dosing.
Max Value of max threshold of manual dosing.
Platform number Number of platform using which the dosing was carried out.
Status
Status of the dosing process, values: Ongoing, Completed,
Aborted.
Dashes Dashed line separating printout data and signature fields.
Signature
An area for the signature of an operator carrying out the dosing
process.
Non-standard printout One of 10 non-standard printouts.
17.5. Formulation Report
Group of parameters allowing you to declare variables that are to be printed on
a formulation report printout. Formulation report is generated automatically
after either completion or abortion of each process.
Variables description
Status
Formulation performance status. Status values: Ongoing, Aborted,
Completed.
Start date Formulation start date.
End date Formulation end date.
Formulation Performed formulation name.
Operator Operator performing formulation process.
Customer Customer for whom the formulation is carried out.
Ingredients quantity Number of formulation ingredients.
Measurements quantity Number of weighings performed within the formulation cycle.
Lot number Lot number assigned to a formulation.
Measurements List of weighings performed within the formulation cycle.
Target value Sum of declared nominal masses of the ingredients.
Sum Total weight value of the performed formulation.
Difference Difference between the sum and the value of expected target weight.
18. INPUTS / OUTPUTS
Standard version of PUE HX7 indicator is equipped with 4 inputs and 4 outputs.
In order to set inputs and outputs enter: <
/ Inputs/Outputs> submenu.