68
None
Manual printout of C label *, performed upon pressing either
or button.
Mass
Automatic printout of C label, triggered upon exceeding of the total mass value
of single labels, set in <Threshold> parameter.
Number
Automatic printout of C label, triggered upon exceeding single labels quantity,
set in <Threshold> parameter.
*) Manual printout of C labels is carried out using one of the two below
programmable buttons:
Printout with zeroing (weighings qty. and total mass values are zeroed).
Printout without zeroing (weighings qty. and total mass values are not zeroed).
In case of automatic printout of C labels, counter zeroing
function is always on (weighings qty. and total mass values
are always zeroed).
• To confirm introduced modifications, press key and go to
<Threshold> parameter, <Threshold> edit box opens.
• Set the value that is to trigger C label printout, mind that:
− in case of <Mode> parameter set to <Mass> value, you must provide
total mass value, upon obtaining of which you want the C label
printout to be triggered,
− in case of <Mode> parameter set to <Counter> value, you must
provide quantity value, upon obtaining of which you want the C label
printout to be triggered.
• Press
key to confirm introduced modifications.
26.7. Statistics
All statistical data is updated in an ongoing manner. The statistical data can be
updated globally (regardless of the weighted product) or individually for each
product that is either weighed or selected from the database.
Procedure:
• Enter <Working modes> submenu and select respective working mode.
• Go to <Statistics> parameter and set respective option.
To Next Page
Loading...
