7
1. INTENDED USE
PUE HX7 weighing indicator is a device intended to make industrial scales
operating on the basis of load cells. It is equipped with a stainless steel housing
of high IP. The PUE HX7 features 7’’ colour display guaranteeing perfect
readability, and diode bar graph visualising MIN, MAX thresholds. It is operated
using 22-key membrane keypad equipped with programmable function keys.
PUE HX7 indicator of standard design offers RS232, USB type A, Ethernet, 4
I/O interfaces. Optionally the indicator can be equipped with an internal battery,
this allows its operation in places where there is no access to the mains. The
device integrates with receipt and label printers, barcode scanners and PC
accessories (mouse, keyboard, USB flash drive).
The HX7 indicator must not be operated in hazardous areas
endangered with explosion of gases, and in dusty
environments.
2. PRECAUTIONS
2.1. Operation
A. Prior the first use, carefully read this user manual. Use the device only
as intended.
B. Place weighed loads in the centre of the weighing pan.
C. Load the weighing pan with loads of gross weight which does not exceed
the maximum capacity.
D. Mind not to leave heavy loads on the weighing pan for longer periods
of time.
E. Protect the indicator against:
- considerable temperature variation,
- solar and UV radiation,
- substances causing chemical reactions.
F. The indicator is not intended to be operated in hazardous areas.
G. In case of damage, immediately unplug the device from the mains.
H. Indicators to be decommissioned must be decommissioned
in accordance with valid legal regulations.
To Next Page
Loading...
