45
Printout examples:
Header GLP printout Footer
17.2. Non-Standard Printouts
The program allows you to design 10 non-standard printouts. Each of them can
consist of approximately 1900 characters (letters, digits, special signs, spaces),
including:
• fixed texts,
• variables conditioned by a particular working mode and operator needs
(mass, date, checkweighing thresholds).
For list of printout variables read ANNEX 01 of this user
manual.
Procedure for adding non-standard printout:
• Enter <Printouts / Non-standard printouts> submenu.
• Press
button (add record) assigned to panel key, a new record
is created, it is defined by the following data:
Name
Non-standard printout name (43 characters maximum).
Code
Non-standard printout code (15 characters maximum).
Project
Text editor of printout template (1900 characters maximum).
For detailed information regarding text box read section 10.3.
17.3. Adjustment Report
Group of parameters allowing you to declare variables that are to be printed
on an adjustment report printout. Adjustment report is automatically generated
at the end of each adjustment process.
To Next Page
Loading...
