Radwin 2000 D+ - Page 200

RADWIN2000D+UserManual Release3.6.00 21‐1
Chapter21:UsingtheWebInterface
21.1WhatisitFor
TheWebInterface(WI)enablesyoutocarryoutbasiclinkmanagementfunctionsusinga
Webbrowser.
Itmaybeusedto‐
• Monitoralinkonaminimalbasis
• Checklinkparametersandmakelimitedchanges
• ViewthelinkInventory
• InspecttheRecentEventslogs
21.2WhoNeedsit
TheWIisatoolfortechniciansto“quick‐install”anODUinalinkwithminimumeffort.
Itmayalsobeemployedbyauserforaquicklookatcurrentoperatingparametersandthe
RecentEventslogs.
21.3HowitWorks
Assume the link setup, which we used in LinkConfiguration and later.
Onthemanagingcomputer,pointyourbrowserto10.104.4.2andlogonasshownbelow.You
canalsologonovertheairtotheSlaveODUinthesameway .
Forstand‐aloneorunregisteredODUs,youmustconnectamanagingcomputerdirectlyto
theODUandagainlogonas
shownbelow.
21.4WhatitProvides
TheWIisadevelopingtechnology.Itispossible thatthecurrentdistributedreleasemayhave
additionalorslightlydifferentfeaturesfromthoseshownhere.Thedescriptionbelow,should
neverthelessgiveyouagoodideaofhowtousetheWI.