R&S FPC Series - Page 364

Function Reference
R&S
®
FPC
361User Manual 1178.4130.02 ─ 07
Channel Power
See "Selecting the channel power measurement" on page 70.
Remote command:
Selection: CALCulate<n>:MARKer<m>:FUNCtion:POWer:SELect on page 235
State: CALCulate<n>:MARKer<m>:FUNCtion:POWer[:STATe] on page 236
Result: CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult? on page 234
Third Order Intermod.
See "Selecting the TOI measurement" on page 75.
Remote command:
CALCulate<n>:MARKer<n>:FUNCtion:TOI[:STATe] on page 239
Spectrogram
See Chapter 14.2.7, "Working with the Spectrogram Result Display", on page 84.
Remote command:
not supported
Spectrogram Playback
See Chapter 14.2.7, "Working with the Spectrogram Result Display", on page 84.
Remote command:
not supported
TDMA Power
See "Selecting the TDMA power measurement" on page 76.
Remote command:
Selection: CALCulate<n>:MARKer<m>:FUNCtion:POWer:SELect on page 235
State: CALCulate<n>:MARKer<m>:FUNCtion:POWer[:STATe] on page 236
Result: CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult? on page 234
Harmonic Distortion
See "Selecting the harmonic distortion measurement" on page 78.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics[:STATe] on page 244
AM Modulation Depth
See "Selecting the AM modulation depth measurement" on page 80.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth[:STATe] on page 245
Occupied Bandwidth
See "Selecting the OBW measurement" on page 81.
Remote command:
Selection: CALCulate<n>:MARKer<m>:FUNCtion:POWer:SELect on page 235
State: CALCulate<n>:MARKer<m>:FUNCtion:POWer[:STATe] on page 236
Result: CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult? on page 234
Function Reference: Spectrum Application