R&S FPC Series - Page 248

Remote Control
R&S
®
FPC
245User Manual 1178.4130.02 ─ 07
Prerequisites for this command
●
Turn on modulation depth measurement (CALCulate<n>:MARKer<m>:
FUNCtion:MDEPth[:STATe]).
Suffix:
<n>, <m>
.
irrelevant
Return values:
<ModulationDepth> <numeric value>
Modulation depth in %.
Example: //Query the AM modulation depth.
CALC:MARK:FUNC:MDEP:RES?
Usage: Query only
Manual operation: See "Marker <x>" on page 366
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth[:STATe]
<State>
This command turns the AM modulation depth measurement on and off.
Suffix:
<n>, <m>
.
irrelevant
Parameters:
<State> ON | 1
Turns on the AM modulation depth measurement.
OFF | 0
Performs a basic spectrum measurement.
*RST: OFF
Example: //Turn on AM modulation depth measurement
CALC:MARK:FUNC:MDEP ON
Manual operation: See "AM Modulation Depth" on page 361
19.12.2 Frequency
[SENSe:]CHANnel......................................................................................................... 246
[SENSe:]CHANnel:TABLe:SELect:DOWNlink....................................................................246
[SENSe:]CHANnel:TABLe:SELect:UPLink........................................................................ 246
[SENSe:]CHANnel:TABLe:SELect....................................................................................247
[SENSe:]CHANnel:TABLe:SET........................................................................................247
[SENSe:]FREQuency:CENTer......................................................................................... 248
[SENSe:]FREQuency:CENTer:STEP................................................................................248
[SENSe:]FREQuency:CENTer:STEP:LINK........................................................................248
[SENSe:]FREQuency:INPut:MODE..................................................................................249
[SENSe:]FREQuency:MODE...........................................................................................249
[SENSe:]FREQuency:OFFSet.........................................................................................250
[SENSe:]FREQuency:SPAN............................................................................................250
Remote Commands of the Spectrum Application