R&S NRP2 - Page 2

This document describes the R&S
®
NRP2 and its options.
●
R&S
®
NRP-B1, Sensor Check Source
●
R&S
®
NRP-B2, Second Sensor Input B
●
R&S
®
NRP-B5, 3rd and 4th Sensor Input C and D
●
R&S
®
NRP-B6, Rear Panel Sensor Input A and B
The firmware of the instrument makes use of several valuable open source software packages. For information, see the "Open Source
Acknowledgement" on the user documentation CD-ROM (included in delivery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.
© 2012 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: info@rohde-schwarz.com
Internet: http://www.rohde-schwarz.com
Printed in Germany – Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
The following abbreviations are used throughout this manual: R&S
®
NRP2 is abbreviated as R&S NRP2, and the R&S
®
NRP-Zxx Power
Sensors are abbreviated as R&S NRP-Zxx.