Compatibility Information
R&S
®
NRP2
403User Manual 1173.9157.02 ─ 03
E4418B/E4419B command Compatibility information
UNIT:POWer:RATio
The R&S NRP2 recognizes the units DB, DPCT and O.
:AC
Agilent recognizes the keyword :AC of some high-level commands
and SENSe commands:
CONFigure | READ | MEASure | FETCh
[:SCALar][:POWer:AC]
:RELative
:DIFFerence
:DIFFerence:RELative
:RATio
:RATio:RELative
SENSe:POWer:AC:RANGe:AUTO
The R&S NRP2 also recognizes these commands but :AVG should be
used instead of :AC since R&S NRP-Zxx Power Sensors sensors
eventually also measure DC components and the designation in the
R&S NRP2 is not used in the sense of SCPI.
To Next Page
