R&S NRP2 - Page 93

Instrument Functions
R&S
®
NRP2
75User Manual 1173.9157.02 ─ 03
Power
Time
Trigger
threshold
Dropout
Excluded from Start
Excluded from End
Last falling edge
in the burst
Trigger event
Measurement
interval
Fig. 4-11: Timing diagram of burst signals
Timing diagram of T'Slot Av signals
The timing diagrams that differ by externally and internally triggered events, show the
relation between the listed parameters:
●
Trigger event, trigger delay and start of the first timeslot
●
Nominal width, exclude intervals and measurement interval of the timeslots
Time
Excluded from End
#1 #2 #3 #4
Width
Trigger event
(external)
Measurement
interval #
Fig. 4-12: Measurement on timeslot signal with external triggering
Data acquisition and parameters