Manual No. 016-3001-015 Rev. C 143
Advanced Settings and Features
7
Default Capacity Button. Touch the Default button on the Miscellaneous Settings screen to reset the
Maximum volume per minute value to 10,000.
Load Cell. Touch the Load Cell button if a Digi-Star load cell will be used for calibration of product remaining
in a bin. Refer to the Digi-Star load cell documentation for additional information on using a load cell with the
Viper Pro.
Node Version Information Screen
Version information is available on the Viper Pro field computer. The Node Version Information screen displays
the software version, software revision, and program number of each node currently detected on the CANbus.
To access the Node Version Information screen from the main screen:
1. Touch in the Product Control area on the main screen.
2. Touch within the Miscellaneous area on the CAN Controller Status screen.
3. Touch the Next button. The Node Version Information screen displays.
4. Touch OK or Cancel to return to the CAN Controller Status screen or Prev to go back to the Miscellaneous
Settings screen.
1.20 (143)
Software
Version
Software
Revision
Program
Number
To Next Page
Loading...
